ASME B16.5 ASTM B564 ALLOY 400 Slip On Flange RF 5 Inch CL300

Quick Details

• Size: 5"  (DN125)

• Material: Monel 400 (UNS N04400)

• Place of Origin: Zhejiang, China (Mainland)

• Brand Name: Tanell

• Standard or Nonstandard: Standard

• Technics: Forged

• Connection: Welding

• Shape: Round

• Standard: ASME B16.5

• Type: ALLOY 400 SORF Flange

Packaging & Delivery

Packaging Details:	Seaworthy plywood case or as customer requests
Delivery Detail:	2 - 10 days after receiving the deposit

Specifications

ASME B16.5 ASTM B564 ALLOY 400 Slip On Flange 5 Inch CL300
1. Material: Monel 400 (UNS N04400)
2. Size: 5"  (DN125)
3. Standard: ASME B16.5

4. Pressure: 300#

China Flange Manufacturer Tanell  offers ASME B16.5 ASTM B564 ALLOY 400 Slip On Flange RF, 6 Inch, CL300.

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Monel Alloy 400 Pipe Flanges Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Monel 400	0.30 max	2.00 max	0.50 max	0.024 max	28.00 – 34.00	2.50 max	63.00 min

Monel 400 Plate Flanges Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Monel 400	8.8 g/cm3	1350 °C (2460 °F)	Psi – 80,000 , MPa – 550	Psi – 35,000 , MPa – 240	40 %

Equivalent Grades for 400 Monel Industrial Pipe Flanges

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Monel 400	2.4360	N04400	NW 4400	NA 13	МНЖМц 28-2,5-1,5	NU-30M	NiCu30Fe

Type	SORF Flange
Size	1/2" to 120"
Standards	SO, WN, SW, TH, LJ, BL, PL, etc
Material	Stainless Steel: ASTM A403 WP304, 304L, 310, 316, 316L, 321, 347, 904L Carbon Steel: ASTM A234 WPB, WPC ASTM A105 WPHY 42, 46, 52, 56, 60, 65, 70 Alloy Steel: ASTM A234 WP1, WP5, WP9, WP11, WP22, WP91 Duplex Stainless Steel: F51, 2205, F53, 2507, etc
Sealing surface	FF, RF, LJ, FM, R.T.J, R.J and so on
Applications	Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc

ANSI, ASME, ASA, B16.5 300lb/sq.in. SLIP ON FLANGE RF / FF
ø	D	b	g	m	J	h	k	Holes	l	Kg.
1/2"	95,6	14,3	34,9	38,1	22,3	22,2	66,7	4	15,9	0,700
3/4"	117,5	15,9	42,9	47,6	27,7	25,4	82,5	4	19,0	1,100
1"	123,8	17,5	50,8	54,0	34,5	27,0	88,9	4	19,0	1,400
1 1/4"	133,3	19,0	63,5	63,5	43,2	27,0	98,4	4	19,0	1,800
1 1/2"	155,6	20,6	73,0	69,8	49,5	30,2	114,3	4	22,2	2,600
2"	165,1	22,2	92,1	84,1	62,0	33,3	127,0	8	19,0	3,400
2 1/2"	190,5	25,4	104,8	100,0	74,7	38,1	149,2	8	22,2	4,400
3"	209,5	28,6	127,0	117,5	90,7	42,9	168,3	8	22,2	6,100
3 1/2"	228,6	30,2	139,7	133,3	103,4	44,4	184,1	8	22,2	7,500
4"	254,0	31,7	157,2	146,0	116,1	47,6	200,0	8	22,2	10,100
5"	279,4	34,9	185,7	177,8	143,8	50,8	234,9	8	22,2	12,500
6"	317,5	36,5	215,9	206,4	170,7	52,4	269,9	12	22,2	14,100
8"	381,0	41,3	269,9	260,3	221,5	61,9	330,2	12	25,4	24,800
10"	444,5	47,6	323,8	320,7	276,3	66,7	387,3	16	28,6	37,100
12"	520,7	50,8	381,0	374,6	327,1	73,0	450,8	16	31,7	50,000
14"	584,2	54,0	412,7	425,4	359,1	76,2	514,3	20	31,7	70,000
16"	647,7	57,1	469,9	482,6	410,5	82,5	571,5	20	34,9	90,000
18"	711,2	60,3	533,4	533,4	461,8	88,9	628,6	24	34,9	112,000
20"	774,7	63,5	584,2	584,2	513,1	95,2	685,8	24	34,9	133,000
22"	838,2	66,7	641,2	641,2	564,4	101,6	742,9	24	41,3	197,000
24"	914,4	69,8	692,1	701,7	615,9	106,4	812,8	24	41,3	208,000

NOTE: 1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

In what forms is Monel 400 Available?

• Sheet

• Plate

• Bar

• Pipe & Tube (welded & seamless)

• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)

• Wire

What are the characteristics of Monel 400?

• Resistant to seawater and steam at high temperatures

• Excellent resistance to rapidly flowing brackish water or seawater

• Excellent resistance to stress corrosion cracking in most freshwaters

• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids

• Excellent resistance to neutral and alkaline salt

• Resistance to chloride induced stress corrosion cracking

• Good mechanical properties from sub-zero temperatures up to 1020°F

• High resistance to alkalis

Corrosion Resistant Monel 400

Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F.

Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

In what applications is Monel 400 used?

• Marine engineering

• Chemical and hydrocarbon processing equipment

• Gasoline and freshwater tanks

• Crude petroleum stills

• De-aerating heaters

• Boiler feed water heaters and other heat exchangers

• Valves, pumps, shafts, fittings, and fasteners

• Industrial heat exchangers

• Chlorinated solvents

• Crude oil distillation towers

Fabrication with Monel 400

Alloy 400 can easily be welded by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. There is no need for post weld heat treatment, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement.

Finished fabrications can be produced to a wide range of mechanical properties when proper control of the amount of hot or cold working and the selection of appropriate thermal treatments is done.

Like most other nickel alloys, Monel 400 is typically tough to machine and will work harden. However, excellent results can e obtained if you make the correct choices for tooling and machining.

Slip on flanges are slipped over the pipe and welded (usually both inside and outside) to provide strength and prevent leakage. Slip on Flanges are at the low cost end of the scale, and do not require high accuracy when cutting the pipe to length. These slip on can sometimes have a boss or hub, and can be made with a bore to suit either pipe or tube.

Where can we find the high quality ASME B16.5 ASTM B564 ALLOY 400 Slip On Flange RF 5 Inch CL300.