1. Material: 304 (UNS S30400)
2. Size: 6" (DN150)
3. Standard: ANSI B16.5
4. Pressure: 150#
Non-standard blind flange is usually used for customers’ special requirement. They indicate the application service , the data, the specification and the drawing . Then we produced the custom flanges according to their requirements.
A Non-Standard blind flange is a solid disk used to block off a pipeline or to create a stop. It is machined in the same manner as a regular flange with the mounting holes around the perimeter and the gasket sealing rings machined into the mating surface. The difference is that a Non-Standard blind flange has no opening to allow fluid to pass through. The Non-Standard blind flange can be inserted between two open flanges and used to block off the flow of liquid through a pipeline.
Without the Non-Standard blind flange it would be difficult to perform maintenance or repairs on a pipeline. The flow would need to be shut off at the nearest valve, which could be miles away from the repair area. Valves are also very expensive and are prone to sticking. The Non-Standard blind flange is a much more cost efficient way of sealing a pipe.
China Custom Blind Flange Manufacturer Tanell supplies ANSI B16.5 ASTM A182 F304 Custom Blind Flange, RF, 6 Inch, CL150.
Chemical Composition and Mechanical Property for 304/304L | |||||||||||
Steel Grade | Chemical Composition | Mechanical Performance | |||||||||
C(Max) | Si(Max) | Mn(Max) | P(Max) | S(Max) | Ni | Cr | N | Mo | Tensile Strength | Yield Strength | |
Mpa | Mpa | ||||||||||
304 | 0.08 | 0.75 | 2.00 | 0.045 | 0.03 | 8.0–10.5 | 18.0–20.0 | 0.1 | / | 515 | 205 |
304L | 0.03 | 0.75 | 2.00 | 0.045 | 0.03 | 8.0–12.0 | 18.0–20.0 | 0.1 | / | 485 | 170 |
